Daltile Technical Resources for Building Professionals
Specification sheets, installation guides, CAD drawings, and engineering data organized for architects, specification writers, and contractors who need answers before drawings freeze.
Documentation library
Resource categories with delivery formats
Use this matrix to request the correct package. Values describe typical coverage; confirm the SKU-specific PDF or CAD revision for your bid set. Representative porcelain sheets list water absorption rate ≤0.5%, breaking strength ≥275 lbf per ANSI A137.1, and wet DCOF ≥0.42 for finishes tested under the ANSI A326.3 method—never treat a sibling finish as interchangeable.
| Resource type | Primary audience | Typical contents | Format |
|---|---|---|---|
| Specification sheets | Specification writers | Water absorption rate, breaking strength, PEI, DCOF (method cited), size tolerances, compressive strength for quartz lines | |
| Installation guides | General contractors | Substrate prep, mortar coverage, movement joints, curing notes, moisture vapor transmission membranes | |
| CAD / BIM drawings | Architects & detailers | Layout patterns, trim profiles, niche and transition details, Color Wheel Linear modules | DWG / RFA |
| Engineering data | Building inspectors & QPs | Slip resistance coefficient methods, thermal shock notes, fire resistance rating of ceramic body, flexural strength for slabs | PDF / XLS |
| Care & maintenance | Facility managers | Cleaner chemistry limits, abrasion resistance class notes, resealing guidance for natural stone lines | |
| Certification letters | Sustainability consultants | GREENGUARD Gold / VOC emissions scope, ISO 9001:2015 & 14001:2015, LEED contribution language, recycled content percentage where published |
Verification path for bid teams: (1) name the exact SKU and finish, (2) open the current datasheet revision date, (3) confirm the DCOF or PEI row matches the room type, (4) request a GREENGUARD Gold or NSF/ANSI 51 letter only when the purchased line is inside that letter’s scope. Sample boards and application-engineer calls remain available when the published PDF leaves a method ambiguous.
Pre-bid checklist
Confirm these items before you lock Division 09
- Exact SKU and finish named Color Wheel Classic Arctic White matte is not interchangeable with gloss for wet-area DCOF targets.
- Test method referenced Slip resistance coefficient claims should cite ANSI A326.3 (wet DCOF) or the lab method actually used—not an obsolete C1028 figure alone—so inspectors share the same evidence trail.
- Trim and bullnose availability Verify matching trim before drawings freeze to avoid orphaned edge conditions during value engineering.
- Lot and shade control notes Hospitality and multifamily packages need batch communication language in the finish schedule.
- Membrane and slope coordination Wet rooms require moisture vapor transmission planning between tile, membranes, and drain elevations.
- Certification scope verified GREENGUARD Gold or NSF/ANSI 51 must match the product line actually purchased—not a sibling SKU.
- Selection trade-offs recorded Natural stone vs. engineered surfaces and green-documentation premiums vs. budget pragmatism should appear as notes in the finish schedule—not after submittals bounce.
Documentation limits (read before you over-promise)
Published DCOF applies to the tested finish under the named method; polish, sealers, or field contamination can move results. Large-format dimensional stability assumes substrate flatness and mortar coverage per ANSI A108—lippage is an install condition, not a glaze defect. GREENGUARD Gold and LEED contribution letters cover stated VOCs and recycled content percentage pathways; they do not by themselves confer project certification points. Quartz compressive strength in the 20,000+ PSI class still requires adequate support spans; cantilevered or poorly supported slabs remain outside warranty assumptions. Outdoor freeze-thaw suitability is SKU-specific—do not extrapolate from an indoor porcelain body.
Natural stone advocates correctly note unique veining and perceived longevity; engineered-surface advocates correctly note shade consistency, lower resealing load, and tighter VOC documentation. Daltile publishes both porcelain/quartz and natural-stone care paths so the dispute is settled with datasheets, not slogans. On sustainability vs. cost, lifecycle documentation can justify premiums on some packages, while code-compliant standard ceramic often meets minimum thresholds without LEED letter stacks—choose deliberately.
Download Full Specifications for your shortlist
Request datasheets, CAD packages, or installation guides tied to the collections on your finish schedule.
Access BIM Library